15
How to Change the RO
-
4040
Membrane
(Recommended about 1 year. Lifespan varies based on
quality of incoming water.)
NOTE!
Make sure you have shut down the KSRO System
,
the Feed Water Adapter Valve, Water Supply, and the Tank
Valve [if you are using a tank]
1.
Power off the KSRO and wait about 10 minutes. Use a No.13
wrench to lose the ring then open the PP End Cap of the
4040 RO Membrane Vessel.
2.
Pull out the RO membrane with a pair of Needle-nose
pliers.
3.
Unwrap the new 4040 RO Membrane, and insert the new
RO Membrane in the Membrane Housing in the correct
direction you noted earlier.
4.
Make sure to push the Membrane in firmly, then close the
vessel by tightening the safety ring with a No. 13 wrench.
5.
Restart the System.
How to Change the Solenoid Valve
Diaphragm
(Recommended about 1 year. Lifespan varies based
on quality of incoming water.
)
NOTE!
Make sure you have shut down the KSRO System
,
Make sure the Feed Water Adapter Valve is fully close.
1.
Disassemble all the parts of the top.
2.
Release the screws of Solenoid Valve, and open it.
3.
Replacing a new Solenoid Valve Diaphragm.
Needle-nose pliers
No.13 Wrench
Safety Ring
