Rotax 24-30-00, Service Instruction

Page: 16 / 21

d0
65
1
5
.f
m
08 February 2019 24-30-00
Initial Issue Page 16 of 21
Copyright - BRP-Rotax GmbH & CO KG. All rights reserved.
SI-PAC-001
SERVICE INSTRUCTION -
PAC
Fig. 17.
3.4.6) V-belt tension
See Chapter 3.3) Maintenance (Line) section 3.3.2) Adjust the V-belt tension.
Step Procedure
6 Attach the tension bar finger-tight to the alternator bracket using 2 hex. screws M8x20
with a lock washer and a washer.
Step Procedure
7 Adjust the pulley tension and tighten M10 and M8 hex. screws with safety wire.
Tightening torque M10: 40 Nm (354 in.lb).
Tightening torque M8: 22 Nm (194.7 in.lb).
1 Hex. screws M8x20
2 Lock washer A8
3 Washer 8.4
4 Tension bar