d
065
15.
fm
SI-PAC-001
SERVICE INSTRUCTION -
PAC
08 February 2019
24-30-00
Initial Issue
Page 13 of 21
Copyright - BRP-Rotax GmbH & CO KG. All rights reserved.
Fig. 11.
Fig. 12
.
m
WARNUNG
NOTICE
The two pulley carries must sit with the centring exactly on the inner side
of the propeller flange.
Step
Procedure
2
Insert both pulley carriers with the centring towards the inner side of the propeller
flange,
3
Push the V-belt pulley onto the two pulley carries and tighten with 8 Allen screws
M5x16 and lock washers.
Tightening torque 6 Nm (53.09 in. lb).
1 V-belt pulley
2 V-belt 9.5x675
3 Propeller flange
1 Allen screws M5x16
2 Lock washer M5
3 Pulley carrier
