Rotary SGL35M, User Manual

Page: 6 / 51

2. Intended use
4
2.
Intended use
2.1 General
WARNING
Risk of injury!
 To prevent injury to persons or property, the
lift should only be operated by trained
operators.
 After reading this manual, become familiar
with operating the lift by conducting several
trial runs before loading a vehicle onto the lift.
The lift is designed to raise and lower cars and
delivery vehicles for repair, maintenance, and
cleaning in a normal workshop environment.
The lift may only be used according to regulations,
in a fully functional condition according to the
technical data in chapter 3.3.
The max load capacity of the whole lift is 3500 kg
and may not be exceeded.
Operators may stand under the raised load.
DANGER
Risk of injury if used incorrectly.
 ALWAYS raise the vehicle with all four (4)
adapters! Never lift only one end, one corner
or one side of the vehicle.
2.2 Incorrect use
Incorrect use presents a residual risk to the life and
health of the people working in the lift zone.
The manufacturer assumes no liability for damage
resulting from use other than the intended purpose
and misconduct.
The following is prohibited:

Climbing onto or riding on the load or pick-up
equipment.

Loitering under the load when raising or
lowering.

Raising vehicles loaded with hazardous
substances.

Installing the lift in areas at risk from explosion.

Using the lift for washing vehicles and under any
other conditions not expressly specified in the
operating manual,

The manufacturer assumes no liability for
damage of any kind which arises through
incorrect, erroneous, or unreasonable use.
3.
The lift
3.1 Functionality

The lift is designed to raise vehicles to the
optimum height for maintenance, cleaning, or
repair work.

The lift is operated by pressing buttons on the
control unit which is attached to one of the
posts.

The vehicle is raised and lowered in jog mode.

Steel cables ensure that the vehicle is raised
horizontally.