Rosslare AYC-F54 Instruction Manual Download Page 37

Page: 37 / 60

Controller Functionality

AYC-Fx4 and AYC-Gx4 family manual

Page 36

6.9.6.

Changing the Programming Code

1) Enter Programming mode.

2) Press “3” to enter Menu 3.

•

The Mode LED will turn

green.

3) Enter the new code you wish to set

as Programming Code

4) System returns to Normal

mode.

•

You will hear three beeps.

Note:

•

Programming Code cannot be erased, i.e. the code 0000 is

not valid and will not erase the Programming Code.

•

The factory four digit programming code is 1234.

6.9.7.

Changing the Normal / Secure Code

1) Enter Programming mode.

2) Press “4” to enter Menu 4

•

The Mode LED will flash red.

3) Enter the new code you

wish to set as Normal /

Secure Code

4) System returns to Normal

mode

•

You will hear three beeps

Note:

•

Code 0000 will erase the Normal / Secure Code.

•

This code is disabled in case the Auxiliary Input is set to

toggle between Normal and Secure access modes.

•

Default Normal/Secure code is 3838

? ? ? ?

Mode/Transmit

Door/Program

Green

Mode/Transmit

Door/Program

Green

Mode/Transmit

Door/Program

Green

Mode/Transmit

Door/Program

Green

Mode/Transmit

Door/Program

Red

Green

Mode/Transmit

Door/Program

Green

Summary of Contents for AYC-F54





























































Search results

Summary of Contents for AYC-F54

Reviews:

Related manuals for AYC-F54

Brands by name

Popular brands

Rosslare AYC-F54, Instruction Manual

Search results

Summary of Contents for AYC-F54

Reviews:

Related manuals for AYC-F54

Brands by name

Popular brands