Rosslare AYC-F54 Instruction Manual Download Page 51

Page: 51 / 60

Controller Functionality

AYC-Fx4 and AYC-Gx4 family manual

Page 50

If the programming code is valid, three beeps will be heard

and the controller will return to its normal mode.

If the programming code is invalid, a long beep will be heard

and the controller will return to its normal mode.

Note:

It is recommended that a record be kept of added and

deleted users so that it will be easier to keep track of which

user slots are empty and which user slots are not.

Deleting Primary and Secondary Codes using the Code Search

Method

1) Enter the Programming

Mode.

2) Press 8 to enter Menu 8.

•

The Door LED will turn

orange

•

The Mode LED will turn red

3) Enter 000 as the 3-digit User Slot number.

•

The Mode LED will turn

red.

•

The Door LED will flash

orange.

The controller is now waiting for the Primary Code of the User you

want to delete.
4) Enter the 4-8 digit PIN Code of the

Primary Code belonging to the user you
want to delete.

•

The Mode LED will flash red

•

The Door LED will flash

orange

5) Enter your Programming Code to confirm the deletion.
If the Programming Code is valid, you will hear three beeps and

the unit will return to Normal Mode.

0 0 0

? ? ? ?

Mode/Transmit

Door/Program

Green

Mode/Transmit

Door/Program

Red

Orange

Mode/Transmit

Door/Program

Red

Orange

Mode/Transmit

Door/Program

Red

Orange

Summary of Contents for AYC-F54





























































Search results

Summary of Contents for AYC-F54

Reviews:

Related manuals for AYC-F54

Brands by name

Popular brands

Rosslare AYC-F54, Instruction Manual

Search results

Summary of Contents for AYC-F54

Reviews:

Related manuals for AYC-F54

Brands by name

Popular brands