Rosslare AYC-F54 Instruction Manual Download Page 35

Page: 35 / 60

Controller Functionality

AYC-Fx4 and AYC-Gx4 family manual

Page 34

6.9.2.

Entering Programming Mode

1) Press the # key twice within 2 seconds.

•

Mode LED will turn off.

•

Door LED will turn red.

2) Enter your Programming Code

•

Door LED will turn green

Note:

•

The AYC-Fx4/AYC-Gx4 must be in Normal Mode to enter the

Programming mode.

•

The factory four digit Programming Code is 1234.

•

If a Programming Code is not entered within five seconds,

the AYC-Fx4/AYC-Gx4 will return to Normal mode.

6.9.3.

Exiting Programming Mode

1) Press the “#” key two times

within 2 seconds

•

You will hear 3 beeps.

•

The Door LED will turn off

and the Mode LED will

return to Normal.

2) Wrong entries may reset the controller back to Normal mode.

3) While in Programming mode, if no key is pressed for one

minute the AYC-Fx4/AYC-Gx4 will exit Programming mode

and return to Normal mode.

6.9.4.

Changing Lock Strike Code

The Lock Strike Code is mainly used as a method to quickly test

the Lock Strike Relay during installation.

When the first user is added to the controller, the default Lock

Strike Code will automatically be deleted. Once the code is

programmed again, it will not be deleted with the entry of

additional User Codes.
1) Enter Programming mode.

? ? ? ?

Mode/Transmit

Door/Program

Green

Mode/Transmit

Door/Program

Red

Mode/Transmit

Door/Program

Green

Mode/Transmit

Door/Program

Green

Mode/Transmit

Door/Program

Green

Summary of Contents for AYC-F54





























































Search results

Summary of Contents for AYC-F54

Reviews:

Related manuals for AYC-F54

Brands by name

Popular brands

Rosslare AYC-F54, Instruction Manual

Search results

Summary of Contents for AYC-F54

Reviews:

Related manuals for AYC-F54

Brands by name

Popular brands