Rosslare AYC-F54 Instruction Manual Download Page 18

Page: 18 / 60

Reader Functionality

AYC-Fx4 and AYC-Gx4 family manual

Page 17

Transmit Mode and the keypad transmission format will remain

unchanged

4) Look on the next page for more information on keypad

transmission formats.

5) System returns to Transmit Mode.

•

You will hear three beeps.

•

The Program LED will turn off

•

The Transmit LED will turn red

Note:

•

Only one keypad transmission format can be active at any

one time.

•

When using the keypad transmission format "1 to 8 keys

BCD, Clock & Data" (Option 8) an additional input is

required to specify the number of keys in the PIN code.

Keypad Transmission Format Option Number

See the table below to determine the Option Number for the

Keypad Transmission Format you wish to select

Keypad Transmission Format

Option Number

Single Key, 6-Bit Wiegand (Rosslare Format)

Single Key, 6-Bit Wiegand with Parity Bits

Single Key, 8-Bit Wiegand, Nibbles Complemented

4 Keys Facility Code, 26-Bit Wiegand

1 to 5 Keys + Facility Code, 26-Bit Wiegand

6 Keys BCD and Parity Bits, 26-Bit Wiegand

Single Key, 3x4 Matrix Keypad

1 to 8 Keys BCD, Clock & Data Single Key

* Option 1 is the default factory setting.

More information on each of the different keypad transmission

formats is available below and on the following pages.

Mode/Transmit

Door/Program

Red

Summary of Contents for AYC-F54





























































Search results

Summary of Contents for AYC-F54

Reviews:

Related manuals for AYC-F54

Brands by name

Popular brands

Rosslare AYC-F54, Instruction Manual

Search results

Summary of Contents for AYC-F54

Reviews:

Related manuals for AYC-F54

Brands by name

Popular brands