Rosslare AYC-F54 Instruction Manual Download Page 24

Page: 24 / 60

Reader Functionality

AYC-Fx4 and AYC-Gx4 family manual

Page 23

5.2.2.

Selecting Proximity Card Transmission Format

The AYC-Fx4/AYC-Gx4 has three different proximity card formats

to select from. Follow the steps below to select the appropriate

Proximity Card reader transmission format that you wish to use.
1) Enter Programming Mode.

2) Press “2” to enter Menu 2.

•

The Transmit LED will turn

red.

3) Enter the appropriate option number for the proxy card

transmission format that you wish to select (options below).

If an incorrect option is entered the reader will return to

Transmit Mode and the keypad transmission format will remain

unchanged.

4) System returns to Transmit Mode

•

You will hear three beeps.

•

The Program LED will turn off

•

The Transmit LED will turn red

Proximity Card Transmission Format Option Number:
Option 1: 26-Bit Wiegand

Option 2: Clock & Data

Option 3: Wiegand Card + PIN

"Wiegand Card + PIN" Transmission Format

This unique mode is intended to let host controllers get card and

keypad data simultaneously. This option overrules the selected

Keypad Transmission Format and sends the keypad data as

described below.
After a card is presented to AYC-Fx4/AYC-Gx4, the program LED

starts to flash in Green and indicates that AYC-Fx4/AYC-Gx4 is

waiting for the PIN code. If the entry of one to five digit keypad

PIN code is disturbed and no digit key or # key is pressed within 5

Mode/Transmit

Door/Program

Green

Mode/Transmit

Door/Program

Red

Green

Mode/Transmit

Door/Program

Red

Summary of Contents for AYC-F54





























































Search results

Summary of Contents for AYC-F54

Reviews:

Related manuals for AYC-F54

Brands by name

Popular brands

Rosslare AYC-F54, Instruction Manual

Search results

Summary of Contents for AYC-F54

Reviews:

Related manuals for AYC-F54

Brands by name

Popular brands