Rosslare AYC-F54 Instruction Manual Download Page 36

Page: 36 / 60

Controller Functionality

AYC-Fx4 and AYC-Gx4 family manual

Page 35

2) Press “1” to enter Menu 1.

•

The Mode LED will turn

red.

3) Enter the new code you wish to set

as the Lock Strike Code.

4) System returns to Normal

mode.

•

You will hear three beeps.

Note:

•

Lock Strike Code does not work in the Secure Mode.

•

Wrong entries will return the controller to Normal Mode.

•

Code 0000 will erase the Lock Strike Code.

•

The factory Default 4-digit Lock Strike code is 2580.

6.9.5.

Changing Auxiliary Code

The Auxiliary Code is mainly used as a method to quickly test the

Auxiliary Relay during installation.
When the first user is added to the controller, the default Auxiliary

Code will automatically be deleted. Once the code is

programmed again, it will not be deleted with the entry of

additional User Codes.
1) Enter Programming mode.
2) Press “2” to enter Menu 2.

•

The Mode LED will turn

orange.

3) Enter the new code you

wish to set as the auxiliary Code.

4) System returns to Normal

mode.

•

You will hear three beeps.

Note:

•

Auxiliary code does not work in the Secure Mode.

•

Wrong entries will return the controller to Normal Mode.

•

Code 0000 will erase the Auxiliary Code.

•

The factory Default 4-digit Auxiliary Code is 0852.

? ? ? ?

Mode/Transmit

Door/Program

Red

Green

Mode/Transmit

Door/Program

Green

Mode/Transmit

Door/Program

Green

Mode/Transmit

Door/Program

Orange

Green

Mode/Transmit

Door/Program

Green

Summary of Contents for AYC-F54





























































Search results

Summary of Contents for AYC-F54

Reviews:

Related manuals for AYC-F54

Brands by name

Popular brands

Rosslare AYC-F54, Instruction Manual

Search results

Summary of Contents for AYC-F54

Reviews:

Related manuals for AYC-F54

Brands by name

Popular brands