Ross Opengear FED-6943, User Manual, Page: 86 / 92

10–6 • DashBoard Menus Fiber Ethernet Switch Transceivers User Manual (Iss. 04)
Setup Tab
Table 10.5 summarizes the Setup options available in DashBoard. Note that the number of
configurable Port fields in the Setup tab is dependent on your card model.
Important
— Contact your IT Department before connecting to your facility network
to ensure that there are no conflicts or the possibility of creating a network loop.
Table 10.5 Setup Menu Items
Menu Title Item Parameters Description
Enable Trunking
Selected
Enables the port trunking feature on the
card
Cleared* Disables this feature
Trunking -
RJ45 #, Fiber #
Trunk 1
Selected
Includes the specified ports into Trunk
Group 1
Cleared* Excludes the port from Trunk Group 1
Trunk 2
Selected
Includes the specified ports into Trunk
Group 2
Cleared* Excludes the port from Trunk Group 2
VLAN -
RJ45 #, Fiber #,
Internal
a
a. Note that a minimum of two ports must be assigned to a VLAN in order to establish communications.
VLAN 1
Selected*
Includes the specified port into Virtual
LAN Group 1
Cleared Excludes the port from VLAN 1
VLAN 2
Selected
Includes the specified port into Virtual
LAN Group 2
Cleared* Excludes the port from VLAN 2
VLAN 3
Selected
Includes the specified port into Virtual
LAN Group 3
Cleared* Excludes the port from VLAN 3
Port Enables
RJ45 #, Fiber #
Selected* Enables the selected port
Cleared
Disables the port. This is useful when
troubleshooting to turn ports off that are
connected to devices without
disconnecting cables
Factory Default
Reset
Resets all configurable settings on the
card to the factory default values