Ross Opengear FED-6943, User Manual, Page: 13 / 92

Fiber Ethernet Switch Transceivers User Manual (Iss. 04) Introduction • 1–3
Features
The following features are common for the Fiber Ethernet Switch Transceivers:
• Compliant with IEEE 802.3 (10/100/1000BASE-T, 1000BASE-X)
• Supports 10/100/1000
1
Base T Ethernet on RJ45 connectors
• Auto negotiation for 10/100/1000
1
speeds, half/full duplex modes, MDI/MDIX
auto-crossover
• Supports two trunk groups between two devices with each trunk group having up to four
ports
• Supports port-based VLAN by allowing the partition of switching ports into virtual
private domains based on individual ports
• Allows for port disabling
• Up to seven available ports using a combination of ethernet (via RJ45 connections), fiber
optic ports, and a GigE internal link to the Network Controller Card in the OG3-FR series
frames.
• LC/UPC optical blind-mate connections
• Card-edge LED indicator for power status
• Rear modules are fully passive using a blind mate LC connection
• Hot-swappable from front of frame with no external connect/reconnect required
• Reports status and configuration remotely via DashBoard
• Compatible with the DFR-8321 series and OG3-FR series frames
• Fully compliant with openGear specifications
• 5-year transferable warranty
1. GigE SERDES support only available when the card is installed in the OG3-FR series frames with Network Controller
Card.