
9–4 • Configuration
Fiber Ethernet Switch Transceivers User Manual (Iss. 04)
Card-edge LEDs Overview
Basic LED displays and descriptions are provided in
Rear Module LEDs
Each RJ45 connector on the rear modules include two LEDs that report the ethernet
communication activity and speed for the card. Refer to
for LED
locations.
Table 9.2 Card-edge LEDs
LED
Color
Display and Description
PWR
Green
When lit green, this LED indicates that the card is functioning normal
and that no anomalies have been detected.
Flashing
Green
When flashing green, this LED indicates that the bootloader is currently
running.
Yellow
When lit yellow, this LED indicates that the CPU is booting.
Red
When lit red, this LED indicates that the card is powering on or there is
a fault condition.
Off
When unlit, this LED indicates a lack of power to the card.
SFP #
a
a.
” on page 9-2 for SFP Optical Module locations.
Green
When lit green, this LED indicates that the Fiber signal on the specified
SFP is functioning correctly and that no anomalies have been detected.
PORT # SPEED
Green
When lit green, this LED indicates the port speed is at 1Gbps.
Orange
When lit orange, this LED indicates the port speed is at 100Mbps.
Off
When unlit, this LED indicates the port speed is at 10Mbps.
PORT #
LINK/ACTIVITY
Green
When lit green, this LED indicates a valid link is established on the port.
Flashing
Green
When flashing green, this LED indicates communication activity is
occurring.
Off
When unlit, this LED indicates an invalid link is detected. Verify the
cable connection on the rear module port and your network connections.
Figure 9.3
8320AR-056 Rear Module LEDs
Figure 9.4
8320AR-057 Rear Module LEDs
Ethernet Port 4 Speed LED
Ethernet Port 4 Link/Activity LED
Ethernet Port 3 Link/Activity LED
Ethernet Port 3 Speed LED
Ethernet Port 2 Link/Activity LED
Ethernet Port 2 Speed LED
Ethernet Port 1 Link/Activity LED
Ethernet Port 1 Speed LED
Ethernet Port 3 Link/Activity LED
Ethernet Port 3 Speed LED
Ethernet Port 2 Link/Activity LED
Ethernet Port 2 Speed LED
Ethernet Port 1 Link/Activity LED
Ethernet Port 1 Speed LED
Summary of Contents for Opengear FED-6943
