Ross Opengear FED-6943, User Manual, Page: 82 / 92

10–2 • DashBoard Menus Fiber Ethernet Switch Transceivers User Manual (Iss. 04)
Status Tabs
This section summarizes the read-only information displayed in the Status tabs. The fields in the
Status tabs can vary in severity from green (valid), yellow (caution), to red (alarm). DashBoard
reports the most severe alarm for a single field. Alarm colors are noted within the tables as text
set in brackets next to the menu parameter name.
Signal Tab
Table 10.1 summarizes the read-only information displayed in the Signal tab.
Note
— The number of Fiber sub-tabs, RJ45 Link Status fields, and Fiber Link
Status fields in the status tabs is dependent on your card model.
Table 10.1 Signal Tab Items
Tab Title Item Parameters Description
Ports
RJ45 # Link Status
OK (Green)
The link for the specified port is valid and
passes information
Suppressed Alarm (Green)
An alarm condition exists on the port but
the corresponding alarm is disabled in the
Alarm Enable tab
Link Failure (Red)
The link for the specified port is invalid
(fails) and the corresponding alarm is
enabled in the Alarm Enable tab
Fiber # Link Status
OK (Green)
The link for the specified port is valid and
passes information
Suppressed Alarm (Green)
An alarm condition exists on the port but
the corresponding alarm is disabled in the
Alarm Enable tab
Link Failure (Red)
The link for the specified port is invalid
(fails) and the corresponding alarm is
enabled in the Alarm Enable tab
Internal Link Status
OK (Green)
The GigE link to the OG3-FR midplane is
valid and passes information
Suppressed Alarm (Green)
An alarm condition exists on the GigE
link to the OG3-FR midplane but the
corresponding alarm is disabled in the
Alarm Enable tab
Link Failure (Red)
The GigE link to the OG3-FR midplane
for is invalid and the corresponding alarm
is enabled in the Alarm Enable tab
RJ45 # Rate
# Mbps
Indicates the speed of the specified port
# Gbps
N/A The link has failed
No Link The link is invalid