Ross Opengear FED-6943, User Manual, Page: 73 / 92

Fiber Ethernet Switch Transceivers User Manual (Iss. 04) Configuration • 9–7
Figure 9.7 Example of Multiple VLAN Setup using a Single FET-6945
For More Information on...
• the ports for your card, refer to the applicable chapter in this manual.
To enable a VLAN setup
1. From the Device View , select the Setup tab.
FET-6945 — Configuring a VLAN Group
2. In the Port Enables area, select the required check boxes to activate the specified RJ45,
Fiber, and Internal ports on your card. To assign ports on the card to a VLAN:
• Locate the VLAN area of the Setup tab.
FET-6945
FIBER 1 RJ45 #1
RJ45 #3
FIBER 2
FIBER 3
INTERNAL LINK
VLAN 1
VLAN 2
RJ45 #2
SER
VER
2
USER
GR
OUP 3
SER
VER
3
MFC-8322-N
IN THE OG3-FR
USER
GR
OUP 2
USER
GR
OUP 1
SER
VER
1