PIM Site Analyzer
α
Manual
© Rosenberger 2017 -
www.rosenberger.com/pia
Page 20 of 54
5.5 Report generation
A report is not only a collection of measurements - it contains a complete set of documentation to proof the
PIM performance of a “device under test”. It includes test parameters, comments, pass fail check and title
sheet with company logo, operator name, equipment serial and so on. Per default similar measurements of
one section are grouped into a graph on one page to save paper and increase comparability, this can be
switched off in the menu. The following graphics show examples of how reports could be structured:
Site Fridolfing Center
47.997730N, 12.824692E
Sector 2
PIM Sweep
+45°
-45°
PIM 2-Tone
+45° tap on surge arrestor
-45° tap on surge arrestor
+45° bended at jumper
-45° bended at jumper
RL/VSWR
+45°
-45°
Sector 3
PIM Sweep
+45°
-45°
PIM 2-Tone
+45° tap on surge arrestor
-45° tap on surge arrestor
+45° bended at jumper
-45° bended at jumper
RL/VSWR
+45°
-45°
New Connector
Technology Qualification
RL/VSWR
p
Sample #3
...
Sample #n
Variant 2 (cost optimized)
PIM Sweep
Sample #1
Sample #2
Sample #3
...
Sample #n
PIM 2-Tone
Sample #1 torque loaded
Sample #1 radial loaded
Sample #2 torque loaded
Sample #2 radial loaded
Sample #3 torque loaded
Sample #3 radial loaded
...
Sample #n
RL/VSWR
Sample #1
Sample #2
Sample #3
...
Sample #n
Variant ...
Report Name
Section
Measurement Type
Comment
