PIM Site Analyzer
α
Manual
© Rosenberger 2017 -
www.rosenberger.com/pia
Page 13 of 54
3.2 Interface Side
When not in use, always keep the interface cover in place, over the socket.
Do not touch the unprotected test port since it is energized by high currents.
Remote-Control
USB
2x USB
LAN 1 Gbit/s
CPRI
BBU IN
CPRI
RRH OUT
Test Port
The test port connector is easily exchangeable.
Connection is one of the most important facts causing PIM product. During
measurement, stable connection is necessary, so a suitable torque wrench is
recommended when connecting test port.
Rosenberger connector interfaces accord with international standard IEC
60169-4, VG 95250, EN 122 190, DIN 47223 completely and the quality ac-
cords IEC 6008.
The recommended torque is 25-30 Nm.
On / Off Switch
RF in
Isolation
