PIM Site Analyzer
α
Manual
© Rosenberger 2017 -
www.rosenberger.com/pia
Page 14 of 54
3.3 Filter
Filter Units are available with preassembled 7/16 or 4.3-10 test port.
3.3.1 Changing the filter
Filter removal during measurement is not allowed, but the filter can be changed
while the device is running. Be sure to protect the connectors on the back of the
filter when handling it.
Integrated Handle
Protected
Test Port
1
Unlock the filter by pushing firmly on
the two locking tabs
2
Lift both latches, so that the filter
raises slightly
3
The filter can now be removed in the
upward direction
4
To install a new filter, follow the
directions the other way around
Status LEDs
