PIM Site Analyzer
α
Manual
© Rosenberger 2017 -
www.rosenberger.com/pia
Page 5 of 54
1 General Information and Safety Instructions
Operation not according to the intended purpose, ignorance of this documentation,
the use of insufficiently qualified personnel as well as unauthorized modifications
exclude the liability of the manufacturer for damages resulting from this and render
any warranty void.
People with cardiac stimulator must not expose the magnetic field of the batteries,
the battery unit, the power unit or the charging cable.
Rosenberger makes every effort to keep the safety standards of our products up to date to offer our custom-
ers the highest possible degree of safety. Our products and the accessory equipment they require are de-
signed, built and tested in accordance with the safety standards that apply in each case. The compliance
with these standards is monitored by our quality assurance system. The product described here has been
designed, built and tested in accordance with the attached CE Certificate of Conformity and has left the
manufacturers plant in a condition fully complying with safety standards. To maintain this condition and to
ensure safe operation, you must observe all instructions and warnings provided in this manual. If you have
any questions regarding these safety instructions please contact Rosenberger to answer them.
Furthermore, it is your responsibility to use the product in an appropriate manner. This product is designed
for field use and must not be used in any way that may cause personal injury or property damage. You are
responsible if the product is used for any intention other than its designated purpose or in disregard of the
manufacturer's instructions. The manufacturer shall assume no responsibility for such use of the product.
The product is used for its designated purpose if it is used in accordance with its product documentation and
within its performance limits (see data sheet, documentation, the following safety instructions). Using the
product requires technical skills and a basic knowledge of the English language. It is therefore essential that
only skilled and specialized staff or thoroughly trained personnel with the required skills are allowed to use
the product. If personal safety gear is required for using Rosenberger PIM Site Analyzer
α
, this will be indi-
cated at the appropriate place in the product documentation. Keep the basic safety instructions and the
product documentation in a safe place and pass them on to the subsequent users.
Observing the safety instructions will help prevent personal injury or damage of any kind caused by danger-
ous situations. Therefore, carefully read through and adhere to the following safety instructions before and
when using the product. It is also absolutely essential to observe the additional safety instructions on per-
sonal safety, for example, that appear in relevant parts of the product documentation.
Operating states and operating positions
The product may be operated only under the operating conditions and in the positions specified by the
manufacturer without the product’s ventilation being obstructed. If the manufacturer's specifications are not
observed, this can result in electric shock, fire and/or serious personal injury or death. Applicable local or
national safety regulations and rules for the prevention of accidents must be observed in all work performed.
•
Never switch output power on (in manual mode or remote mode) without load or terminated OUT
connected to the test port.
•
Unless otherwise specified, the following requirements apply to this product: IP protection 2X,
pollution severity 2, over voltage category 2, max. operating altitude 2000 m above sea level, max.
