manualshive.com logo in svg

Rose electronics RP2-1R2X16U, Installation And Operation Manual, Page: 16 / 68

Share
Download
Rose electronics RP2-1R2X16U Installation And Operation Manual Download Page 16

 

 

ULTRAMATRIX REMOTE INSTALLATION AND OPERATIONS MANUAL

  

10 

Main Menu 

 
 

(Pressing the left control key, then F12 displays the main menu) 

 
   

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

Figure 5. Main menu 

The Main configuration menu is the starting point for the configuration menus.  From this menu, you can configure 
the system, computers, KVMs, users, profiles, groups, and languages.  To display the “Main menu” locally, press and 
release the left control [Ctrl] key, then the F12 key. The main menu will display on top of a currently connected 
computers video.  If no computer is connected to supply the video, the display’s background is black.  To display the 
main menu from a workstation on the network using the remote viewer, the viewer must be in the pass-through mode 
to send the command to the UltraMatrix Remote.  The pass-through mode is explained in the install / configure the 
remote viewer section. 
 
The text box at the bottom of the menu screen provides a brief explanation of the menu option selected. 
 
The following pages explain the UltraMatrix Remote menus and the options available. 
 
 

Save the changes made to any menu.  If not saved, the changes will be lost when power is 
removed from a Unit. All menu commands must be entered within 2 seconds of each other 
or the command is aborted. 
 
 
 
 
 
 
 
 
 

UltraMatrix version MX21C Rose Electronics   Copyright 1990-2002 

 

Main Menu 

 

Configure 

 

  

System 

 

   Computer 

 

  KVM 

 

  User 

 

  Profile 

 

  Group 

 

  Language 

 

Status 

 

Save 

 

Exit 

 

 

Use up/down arrow keys 

To choose selection 

then press the Enter key 
Or the Escape key to exit 

 

 

Configure password,  box number,  keyboard settings, appearance 

Summary of Contents for RP2-1R2X16U





































































Reviews:

No comments