Controller functions
Version 1
RES-430
Page 41
10.3.2 Navigation in menus with an alarm
If an alarm is signaled, the controller switches to the Alarm menu. Some faults can be acknowledged by pressing
the "RESET" key (
section 10.20 "System monitoring / alarm output" on page 60). In this case, the controller
switches back to the home position.
If the fault can be rectified by executing the AUTOCAL function, you can select the "AUTOCAL" menu step directly
by briefly pressing the "MENU" key (<2s). You can then activate the "AUTOCAL" function by pressing the
"ENTER" key (
section 10.8 "Automatic zero calibration (AUTOCAL)" on page 47).
If you press the "MENU" key for longer than 2s in the Alarm menu, you are taken directly to the configuration level
(starting at step 201). You can return from the Configuration menu to the Alarm menu either by pressing the
"MENU" key for longer than 2s or by not pressing any keys for 30s.
201
Language
Alarm
<2s
>2s
<2s
Alarm
automatically
after 30s
>2s
or
automatically
after 30s
>2s
or
ENTER
HAND
RESET
ENTER
HAND
RESET
Home position
End of
Autocal
107
202
Factory settings
