Controller functions
Page 38
RES-430
Version 1
10
Controller functions
See also section 8.4 "Wiring diagram with relay K1 (standard)" on page 18.
The menu step numbers indicated in the following are valid as of software revision 007. Please refer
to the reference table in section 10.4 "Menu structure" on page 42 for information about the num-
bers used for older controller versions.
10.1
Indicators and controls
10.2
Display
10.2.1 Power-up message
A power-up message appears on the display for approximately 2 seconds when the controller is switched on. This
message also includes details of the software version.
!
ENTER
HAND
RESET
ROPEX
RESISTRON
RES-4
"MENU" key for advancing to next menu step
or switching menu
< 2 sec. Press: Next menu step
1-2 sec. Press: Return to previous position
(as of SW-Revision 100):
> 2 sec. Press (Hold):
Return to home position
"ENTER" key
ENTER function:
HAND function:
RESET function:
Save values
Manual mode
Reset after alarm
"UP" and "DOWN" keys for setting values
Press (< 2 sec.): Slow change
Hold (> 2 sec.): Fast change
LC display, 4 lines, multilingual
Company name
(optional: customer-specific)
Software ID number
Controller type (RES-430)
