51
SETUP FOR OPERATION WITHOUT A ROUTER
You can setup an OTDAU/MC system where the camera(s) connect directly to a
computer, without going through a router. This configuration may be required, for
instance, when setting up a system that has to operate stand-alone, independent of any
direct internet connection.
To do this, you will need to modify the PC’s IPv4 address to static instead of DHCP.
This change will place the
camera(s) and the PC on a common LAN by setting the PC’s
IP address and that of the camera to have the same first three parts of the LAN address
(192.168.1.x). Despite this change, the PC will still have internet access when
connected to a router.
1)
Press the W R keyboard shortcut to bring out the Run box.
2)
Enter “cmd” and press Enter to open a system command window.
3)
Type “ipconfig” and Enter to find your computer’s IPv4 address.
Summary of Contents for 42212TNI
