Ronald 42212TNI, Installation Manual

Page: 35 / 68

35
installation is not in the US, just use an AC adapter or a different line cord in
accordance with your AC power wall socket.
3. Using a second, short Ethernet cable, plug one end into the LAN connector on
your PoE injector. For a 4-port injector, this is the right connector on the front of
the PoE injector labeled “5 - Uplink”. For a single-port injector, it is labeled “LAN”.
We will connect the other end in a subsequent step.
4. Route the unconnected end of a long camera cable from the camera assembly or
MSDAU to the PoE injector, by some convenient route and avoiding creating a
tripping hazard.
5. As shown below, plug the routed end of the camera or MSDAU cable into any of
the four unused ports of a four-
port PoE+ injector or the “POE” port on a single-
port injector. This cable may be a bit stiff so bend it near the injector so that the
connector goes straight into the injector socket, relieving stress on the
connection.
6. There are two options for connecting the camera via the injector to your router
–
hardwired or by WiFi.