14
TRIPOD INSTALLATIONS FOR CAMERAS
DAHUA 50230 OR 42212 CAMERA SETUP
Your system may have one or more Dahua 50230 30x zoom or 42212 12x zoom
cameras. If so, then perform the following steps.
A Dahua 44212 camera mounted on a Camera Mount is shown below.
Note that the tripod legs may be extended and spread from vertical to fully horizontal to
accommodate a wide range of height and stability requirements. However, if the legs
are spread too far, then the leg tips cannot grip the ground which may result in
undesired spread.
For tripod mounting, open the tripod legs sufficient for stability. Place the System mount
on top of the tripod and start the tripod screw into the mount socket. Try to align the
mount in the approximate center of the tripod head. Tighten the tripod screw by hand
using the handle under the screw. Adjust the tripod legs for length and spread for the
required MSDAU/camera height and for good stability.
Summary of Contents for 42212TNI
