Ronald 42212TNI, Installation Manual

Page: 49 / 68

49
of digits is the device’s unique address, such as 108. If your camera and router are
not on the same LAN, then correct that by changing the IP address of the router or
that of the camera, as shown below. It may be easier to change the router if all your
other devices use DHCP addressing (not static). When you reset the router or cycle
power, it will reassign all DHCP addresses transparently and none of the example
Camera configurations that are provided with OTDAU software will need to be
changed.
4.
Navigate to the router’s DHCP settings. Change the address range used by the
DHCP Server Pool to avoid assigning an address that is the same as your camer
a’s.
Do this by changing the Ending Address to some value below that of your camera(s),
such as 100.
5. Click Apply to implement any changes.