4801-5164J
20 October 2021
20
RS-500 5K Walk-In Cooler Door Installation and Operation Manual
Section 2.7: Connect Power to Door
NOTICE:
The door is designed to accept either a 115VAC or 230VAC power supply.
1. Ensure the voltage selection switch at the bottom right of the control board is set to the appropriate voltage.
2. Mount the circular plastic connector (CPC) bracket to the right track using the provided hardware.
WARNING
Do not turn the power on until the following conditions have been met:
•
All wire and cable connections are completed.
•
The voltage selection switch is set to match the required supply voltage.
