manualshive.com logo in svg

Roland VersaStudio BN-20, Master Manual

The Roland VersaStudio BN-20 is a cutting-edge printing and cutting machine aimed at small businesses. With its compact design and versatility, this innovative device is perfect for producing high-quality prints and intricate cuts. Enhance your productivity effortlessly with the help of the user-friendly Master Manual, available for free download from manualshive.com.

Share
Download
background image

Contents

2

http://www.rolanddg.com/

Company names and product names are trademarks or registered trademarks of their respective holders.

Copyright © 2011 Roland DG Corporation

Chapter 3  Maintenance ....................................................................................67

Introduction: About Maintenance .................................................................68

Automatic Maintenance Function: Points to Note .............................................................68
Maintenance Schedule .................................................................................................................68

Checking Ink Levels and Replacing  ...........................................................69

Checking Ink Levels .......................................................................................................................69
How to Replace Ink Cartridges ..................................................................................................70

Daily Maintenance .......................................................................................71

Maintenance of Ink Cartridges ..................................................................................................71
Cleaning .............................................................................................................................................71
Replacing the Waste Cartridge ..................................................................................................72
Care and Maintenance of the Print Heads .............................................................................73

Periodical Cleaning Maintenance ................................................................74

About Periodical Cleaning Menus ............................................................................................74
Medium and Powerful Cleaning ...............................................................................................74
Manual Head Cleaning .................................................................................................................76

Replacing Consumable Parts ......................................................................78

Replacing the Wiper ......................................................................................................................78
Replacing the Felt Wiper ..............................................................................................................79
Replacing the Cutter Blade .........................................................................................................80

When Moving the Unit .................................................................................82

Procedures from Preparing to Move Through Reinstalling .............................................82

Chapter 4  Appendix ..........................................................................................83

Read this section whenever you face a problem ........................................84

The Machine Doesn’t Run ............................................................................................................84
Attractive Printing or Cutting is Impossible ..........................................................................85
Media Jam Occurs! .........................................................................................................................87
Media Feed is Not Smooth ..........................................................................................................87
Print Head Stops Moving. ............................................................................................................88
Installation is impossible .............................................................................................................89
When uninstalling the driver, perform following operation. .........................................91

Important Notes When Performing Output from General Application .........93

Important Notes When Performing Output from Adobe Illustrator ............................93
Important Notes When Performing Output from CorelDRAW.......................................93

Handling Messages and Error Messages ...................................................94

A Message Appears .......................................................................................................................94
An Error Message Appears ..........................................................................................................95

Main Specifications

 .....................................................................................98

Maximum Area ................................................................................................................................98
Maximum Area When Using Crop Marks ...............................................................................98
About the Blade ..............................................................................................................................99
Locations of the Power Rating and Serial Number Labels...............................................99
Dimensional Drawing ................................................................................................................ 100
Specifications ................................................................................................................................ 101
System Requirements for USB Connection ........................................................................ 103

Summary of Contents for VersaStudio BN-20

















































































































Reviews:

No comments

Related manuals for VersaStudio BN-20

Roland TrueVIS VG-640 User Manual preview
TrueVIS VG-640
Brand: Roland Pages: 200
Oce TDS300 User Manual preview
TDS300
Brand: Oce Pages: 132
MIMAKI JV22-130 Operation Manual preview
JV22-130
Brand: MIMAKI Pages: 126
MIMAKI CF3-1610 Operation Manual preview
CF3-1610
Brand: MIMAKI Pages: 166
MIMAKI CFL-605RT Operation Manual preview
CFL-605RT
Brand: MIMAKI Pages: 170
GCC Technologies BENGAL User Manual preview
BENGAL
Brand: GCC Technologies Pages: 39

Brands by name

Popular brands

Load more brands