Roland VersaStudio BN-20 Master Manual Download

Page: 9 / 112

Introduction

Chapter 1 The Basics

How to Open the Utility Window / Exit the Utility

How to Open the Utility Window

Click the Utility icon on the

task tray.

(Or, right-click the

, and

then click [View/Hide].)

The Utility window is displayed.

is not displayed on the task tray, start Utility from the Windows start menu.

Starting from the Windows start menu

From the start menu, click [All Programs] or [Program] >> [Roland BN-20] >> [Utility].

Utility starts.

How to Exit the Utility

Right-click the

(Utility

icon) in the task tray, and then

click [End].

The Utility screen closes.

Utility is resident software

Utility is “resident software” that is always run-
ning. To hide the window, click

at the

upper right of the window or click [Close]; Utility
will not terminate.

Summary of Contents for VersaStudio BN-20

















































































































Search results

Summary of Contents for VersaStudio BN-20

Reviews:

Related manuals for VersaStudio BN-20

Brands by name

Popular brands

Roland VersaStudio BN-20, Master Manual

Search results

Summary of Contents for VersaStudio BN-20

Reviews:

Related manuals for VersaStudio BN-20

Brands by name

Popular brands