manualshive.com logo in svg

Roland VersaStudio BN-20, Master Manual, Page: 69 / 112

Share
Download
Roland VersaStudio BN-20 Master Manual Download Page 69

Chapter 3   
Maintenance

Introduction: About Maintenance .................................................68

Automatic Maintenance Function: Points to Note......................68
Maintenance Schedule ..............................................................68

Checking Ink Levels and Replacing  ............................................69

Checking Ink Levels ..................................................................69
How to Replace Ink Cartridges ..................................................70

Daily Maintenance .......................................................................71

Maintenance of Ink Cartridges...................................................71
Cleaning ....................................................................................71
Replacing the Waste Cartridge ..................................................72
Care and Maintenance of the Print Heads ................................73

Periodical Cleaning Maintenance ................................................74

About Periodical Cleaning Menus .............................................74
Medium and Powerful Cleaning.................................................74
Manual Head Cleaning ..............................................................76

Replacing Consumable Parts ......................................................78

Replacing the Wiper ..................................................................78
Replacing the Felt Wiper ...........................................................79
Replacing the Cutter Blade........................................................80

When Moving the Unit ..................................................................82

Procedures from Preparing to Move Through Reinstalling ........82

67

Summary of Contents for VersaStudio BN-20

















































































































Reviews:

No comments