112
8. Appendix
8-4 About Blade Life
Cutting conditions and blade life vary according to the hardness of the media and the usage environment. Making the
settings for the conditions described below does not automatically guarantee attractive cutting results in all situations.
Before performing actual cutting, be sure to carry out a cutting test and make any necessary adjustments. (See "3-1
Points to Check Before Performing Output.")
If the media is not cut through completely even when the tool force is increased by 50 to 60 gf more than the tool force
values shown below, it means that the useful life of the blade has ended. Replace with a new blade.
Blade
Media
Tool-force
Amount of cutter offset
Life of a blade
(General guide)
ZEC-U1005
General Signage Vinyl
50 to 150 gf
0.25 mm
8000 m
ZEC-U5025
General Signage Vinyl
30 to 100 gf
0.25 mm
4000 m
Fluorescent Vinyl
120 to 200 gf
0.25 mm
4000 m
Reflective Vinyl
100 to 200 gf
0.25 mm
4000 m
* The values for the life of a blade are intended to serve as a general guide when cutting media of identical type.
Summary of Contents for SP-300
