Roland SP-300, User Manual

Page: 110 / 115

108
8. Appendix
8-1 Specifications
Printing/Cutting method
Printing/Cutting width (*1)
Acceptable media widths
Type
Ink cartridges Capacity
Color
Printing resolution (Printing dot resolution)
Acceptable tool
Cutting Speed
Blade force
Blade offset compensation
Setting range of the preset
Printing Heater
temperature
(*2) Dryer
Software resolution (When cutting)
Distance accuracy (Printing while using
heater)
Distance accuracy (When cutting) (*3)
Repetition accuracy (When cutting) (*3)
Repetition between printing and cutting (*3)
Interface
Power-saving function
Power supply Voltage and frequency
Required power capacity
Power consumption Printing mode
Sleep mode
Acoustic noise level Printing mode
Standby mode
Dimensions (With stand)
Weight (With stand)
Packed dimensions
Packed weight
Environment Power on (*4)
Power off
Included items
SP-300
Piezo ink-jet method/media-moving method
147 to 736 mm (5-13/16 to 29 in.)
182 to 762 mm (7-3/16 to 30 in.)
Exclusive ECO-SOL INK cartridge
220 cc ±5 cc
The four colors cyan, magenta, yellow, black
Max. 1440 dpi
Special blade for CAMM-1 series
10 to 300 mm/s
30 to 300 gf
0.000 to 1.500 mm
35 to 50ºC (94 to 122ºF)
35 to 50ºC (94 to 122ºF)
0.025 mm/step
Error of less than ±0.4% of distance traveled, or 0.5 mm, whichever is greater
(in Roland SV-G-610G, print travel: 1 m, temperature: 20ºC, humidity: 50%, heater
temperature setting: 40ºC)
Error of less than ±0.4% of distance traveled, or 0.3 mm, whichever is greater
When distance correction ([CUTTING ADJ.] menu item) has been performed: error
of less than ±0.2% of distance traveled, or 0.1 mm, whichever is greater
0.1 mm or less (excluding stretching/contraction of the media)
±0.5 mm max. at 25ºC (excluding possible shift caused by expansion/contraction of
the media and/or by reloading the media)
USB interface (compliant with Universal Serial Bus Specification Revision 1.1)
Automatic sleep feature (compliant with the International E
NERGY
S
TAR
®
Office Equip-
ment Program)
AC 100 to 120 V ±10% 50/60 Hz or AC 220 to 240 V ±10% 50/60 Hz
6.0A (100 to 120 V) or 3.0 A (220 to 240 V)
Approx. 650 W
Approx. 29 W
64 dB (A) or less (according to ISO 7779)
40 dB (A) or less (according to ISO 7779)
1720 [W] x 770 [D] x 1275 [H] mm (67-3/4 [W] x 30-3/8 [D] x 50-1/4 [H] in.)
130 kg (287 lb.)
1890 [W] x 830 [D] x 900 [H] mm (74-1/2 [W] x 32- 3/4 [D] x 35-1/2 [H] in.)
161 kg (355 lb.)
Temperature: 15 to 32ºC (59 to 90ºF) (20ºC [68ºF] or more recommended), Humid-
ity: 35 to 80% (no condensation)
Temperature: 5 to 40ºC (41 to 104ºF), Humidity: 20 to 80% (no condensation)
Exclusive stand, cleaning liquid cartridges, media flanges, small media clamps, large
media clamps, blade, blade holder, replacement blade for separating knife, cleaning
kit, CD-ROMs, power cord, manuals
*1 The length of printing or cutting is subject to the limitations of the program or driver.
*2 The heater temperature may not reach the preset temperature depending on ambient conditions or the width of the media.
*3 Accuracy is assured within a range in which the media-feed length is 3,000 mm or less and expansion or contraction due to heater use is excluded.
And the setting for heater use requires a warm-up period of about 5 minutes after powerup. (Time may vary depending on the operating environment.)
*4 Environment
80
55
35
15 27 32
Humidity
20
(%)
°
C (
°
F)
(no condensation)
Temperature
(59) (89.6) (80.6) (68)
0
We recommend use in an operating
environment within the range
shown by solid lines.