89
5. Maintenance
5-6 When Moving the Unit
When you move the machine, you first clean the heads. Cleaning of the heads requires four SOL INK cleaning car-
tridges.
When head cleaning finishes, detach the cables connected to the machine and remove the drain bottle.
Finally, secure the printing carriage in place to finish preparing the machine to be moved.
Cleaning the Heads
1
If there is media loaded, remove the media.
2
Press the [MENU] key. Press the [ ] key to se-
lect [INK CONTROL].
3
Press the [
] key.
The following screen appears.
4
Press the [ ] key to select [HEAD WASH], then
press the [ENTER] key.
5
When the following screen appears, discard the
discharged ink in the drain bottle.
6
Attach the drain bottle and press the [ENTER]
key.
The following screen appears.
Be sure to use SOL INK cleaning cartridges. Use of any other type may result in breakdown.
MENU
INK CONTROL
INK CONTROL
EMPTY MODE
INK CONTROL
HEAD WASH
EMPTY
DRAIN BOTTLE
REMOVE SOL CRT.
1 2 3 4
Be sure to discard the discharged ink. Attempting to
clean the heads while discharged ink remains may
cause discharged ink to overflow from the bottle.
For more information about how to dispose of dis-
charged ink, refer to "5-5 Disposing of Discharged
Ink."
All numbers flash.
Summary of Contents for SP-300
