background image

5375 (08/13) 

411-121099 

INSTRUCTION

 

CLASS 1- Public 

 

 

 

 

 

© 2021 TE Connectivity Ltd. family of companies.  
All Rights Reserved. 
| Indicates Change

 

TE Proprietary & Confidential Information 

Class I Data Classification - See Policy TEC-02-04 

1 of 17 

Rev [1]

 

 

5 October 2021 

 

 

 

 

 

AMS600 PLOTTER OPERATING 

INSTRUCTIONS 

 
 

 

 

 

THIS IS A CLASS 1 DOCUMENT WHICH IS NONCONFIDENTIAL. 

 
The information contained within this document is the property of TE Connectivity.  It is supplied in confidence and the 
commercial security of the contents must be maintained.  It must not be used for any purpose other than that for 
which it is supplied nor may any information contained in it be disclosed to unauthorised persons.  It must not be 
reproduced in whole or in part without obtaining written permission from TE Connectivity (TE). 

  

 

While TE has made every reasonable effort to ensure the accuracy of the information in this catalog, TE does not guarantee that it is error-free, nor does TE make any other representation, 
warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. 
TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. 
The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions 
and design specifications.

 

*Trademark.  TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks.  Other logos, product and/or company names may be trademarks of their respective owners.

 

 
 

 

Summary of Contents for AMS600


















Reviews: