19
Part 1 Setting Up
1-3 Setting Up and Connection Setting
Setting Up
Install on a stable surface.
Failure to do so
may result in falling
of the unit, leading
to injury.
Use within a temperature range of 5 to 40
°
C (41 to 104
°
F) and within a humidity range of 35 to 80%.
NOTICE
Do not place any objects on the main unit's head.
To prevent accidents, do not install in any of the following types of areas.
• Avoid use in areas subject to strong electric noise.
• Avoid use in areas subject to high humidity or dust.
• The machine generates heat when used, and should not be installed in an area with poor heat radiation
characteristics.
• Do not install in an area subject to strong vibration.
When the unit is mounted on a stand with casters, be sure to lock the caster stoppers securely.
Do not place anything within the
moving area of the T-slot table.
The object may bump into the T-slot table
and fall, resulting in injury.
Moving area of
the T-slot table
Unpacking, installation, and moving
are operations that must be carried
out by five or more persons for the
MDX-650A/650 and by four or more
persons for the MDX-500.
Failure to do so may result in falling of the
unit, leading to injury.
(The MDX-650A/
650 weighs 120
kg (264.5 lb.),
and the MDX-
500 weighs 92
kg (202.8 lb.). )
When moving, grasp the aluminum
base portion at the bottom portion of
the unit, and carry out the operation
with five or more persons for the
MDX-650A/650 or with four or more
persons for the MDX-500.
If grasped by the
rear cover, the
unit may fall,
resulting in injury.
Summary of Contents for MODELA Pro MDX-500
