Roland MODELA Pro MDX-500, User Manual

Page: 5 / 72

3
Do not use with a damaged power
cord or plug, or with a loose
electrical outlet.
Use with any other
power supply may
lead to fire or
electrocution.
Do not injure or modify the electrical
power cord, nor subject it to
excessive bends, twists, pulls,
binding, or pinching, nor place any
object of weight on it.
Doing so may
damage the
electrical power
cord, leading to
electrocution or
fire.
When not in use for extended
periods, unplug the power cord from
the electrical outlet.
Failure to do so may
result in danger of
shock, electrocution,
or fire due to
deterioration of the
electrical insulation.
When unplugging the electrical
power cord from the power outlet,
grasp the plug, not the cord.
Unplugging by pulling the cord may damage
it, leading to fire or electrocution.
Do not attempt to unplug the power
cord with wet hands.
Doing so may
result in electrical
shock.
Install on a stable surface.
Failure to do so
may result in
falling of the unit,
leading to injury.
Do not connect the power cord with
other electrical loads on a single
electrical outlet.
Doing so may generate heat and cause fire.
When moving, grasp the aluminum
base portion at the bottom portion of
the unit, and carry out the operation
with five or more persons for the
MDX-650A/650 or with four or more
persons for the MDX-500.
If grasped by the
rear cover, the
unit may fall,
resulting in injury.
Unpacking, installation, and moving
are operations that must be carried
out by five or more persons for the
MDX-650A/650 and by four or more
persons for the MDX-500.
Failure to do so may result in falling of the
unit, leading to injury.
(The MDX-650A/
650 weighs 120
kg (264.5 lb.),
and the MDX-
500 weighs 92
kg (202.8 lb.). )
Fasten the spindle, tool, and
material securely in place.
Otherwise they may come loose during
cutting, resulting in injury.
Do not touch the tip of the blade
with your fingers.
Doing so may result in injury.