Chapter 5
Getting Ready for and
Performing Cutting
5-1 Cutting Area .................................................................................................66
Workpiece Size and Location Where Secured in Place ...................................... 66
Actual Size That Can Be Cut .............................................................................. 67
5-2 Examples of Usage of Tool-length Offset (RML-1 Mode) .............................68
Example of Operations up to Starting Cutting .................................................... 68
Example of Setting the Z-axis Origin .................................................................. 68
5-3 Examples of Usage of Tool-length Offset (NC-code Mode) ..........................69
Example of Operations up to Starting Cutting .................................................... 69
Example of Setting the Z-axis Origin .................................................................. 70
65
