4-3 Entering Adjustment Values Yourself
Entering Adjustment Values
When you've measured tool length yourself, follow the procedure below to register the adjustment values.
Procedure
In VPanel, click the [Length Offset]
icon.
Enter the adjustment value.
Click [OK].
About the Offset Numbers
The numbers displayed in the [Length Offset] dialog box are the offset numbers. In the NC-code mode, the offset numbers
may not necessarily be identical to the stocker numbers. It's important to remember that, for example, offset No. 2 may be
assigned to stocker No. 1. In the RML-1 mode, it's not necessary to be aware of any differences between stocker numbers
and the offset numbers.
☞
P. 64, "Correspondences Between Stocker Numbers and Offset Numbers"
62
Chapter 4 Tool-length Offset
