Main Specifications
ZAT-540
Number of tools housed
4
Maximum tool length
110 mm (4.3 in.)
Maximum tool diameter
10 mm (0.4 in.)
Maximum tool weight
350 g (0.77 lb.)
Tool-holder format
Taper shank: JBS4002 15T 7/24 taper
Pull stud: JBS4002 15P (45˚), special
Tool-selection method
Direct-changing type, fixed-address specification
Compatible compressed
air
0.7 to 1.0 MPa, 50 L/min or higher
Spindle speed
400 to 12,000 rpm; 400 to 3,000 rpm for positioning and centering
Weight
6.8 kg (15 lb.) (total weight including spindle, magazine, control box, etc.)
Included items
Control box, magazine unit, ATC spindle, air cylinder, base plate, Z-origin sensor, spacer,
cap screws, plastic screws, hexagonal wrenches, retaining bands, cable retainers, User's
Manual
When this unit is installed, the X-axis travels of the MDX-540S and MDX-540 are as follows.
Standard table, no rotary axis unit: 400 mm (15.7 in.)
Standard table, rotary axis unit present: 270 mm (10.6 in.)/325 mm (12.7 in.) (with expanded X-axis travel)
T-slot table, no rotary axis unit: 400 mm (15.7 in.)
T-slot table, rotary axis unit present: 203 mm (7.9 in.)/258 mm (10.1 in.) (with expanded X-axis travel)
85
Chapter 7 Appendix
7-5 Unit Specifications
