Support the tool with your hand to
keep it from falling.
On the handy panel, press the
[CLEAR] key.
After the tool holder is released, return to the normal startup procedure. Press the [ENTER] key to perform initialization, then
start VPanel.
If No Handy Panel Is Attached
After switching on the power, start VPanel. Following the on-screen instructions displays a window for forced release of the
tool holder. Use this to perform the release.
If neither the handy panel nor VPanel is available, the tool holder cannot be released, and so startup is not possible.
How to Shut down
Before shutting down, return the tool holder to the magazine. Whenever possible, avoid shutting down while a tool holder
remains gripped.
☞
P. 55, "3-3 Manual Tool-change"
51
Chapter 3 Basic Operation
3-1 Starting and Quitting
