Roland Fantom G6 User Manual Download

Page: 49 / 340

Playing in Single Mode

Over

view

Sound 1

Sound 2

Sound 3

Pad

Sampler

Menu/System

Appendix

Sequencer

You can display a list of patches and select a patch from that list.

Press [SINGLE] to access the Single Play screen.

Press [F1 (Patch List)].

The Patch List screen will appear.

fig.05-008_50

You can use [F3 (Patch)], [F4 (Rhythm Set)], and [F5 (Sample
Set)] to switch between patch types (patches, rhythm sets,
samples sets).

Use [F1] [F2] or

to select a category.

You can also use the front panel [Knob 4] to select a category,
and use [Slider 8] to scroll the list.

→

“Magic Control”

(p. 294)

You can’t select categories for rhythm sets or sample sets.

Turn the VALUE dial or use [DEC] [INC] or

select a patch.

You can press [F7 (Preview)] to audition the patch using an
appropriate phrase that is preset for each category (Phrase
Preview).

By pressing [F6 (User Group)] you can register a frequently
used sound in the user group. For details, refer to

“Registering

a sound in the User Group screen”

(p. 201).

If you’re using a USB mouse, you can click the keyboard symbol

in the screen, and search using the virtual keyboard

that appears in the screen.

Press [F8 (Select)] to confirm your patch selection.

The Fantom-G allows you to preview patches by hearing a phrase
appropriate for each type of patch.

Press [SINGLE] to access the Single Play screen.

Press [F1 (Patch List)] to access the Patch List screen.

fig.05-009_50

Press and hold [F7 (Preview)].

The patch selected in the Patch List screen will be sounded.

Release your finger from [F7 (Preview)], and the phrase will
stop playing.

If you wish to change how the phrase is played by Phrase
Preview, you can edit the Preview Mode parameter (p. 300).

Selecting Patches from the List

Auditioning Patches

(Phrase Preview)

Fantom-G_r_e.book 49 ページ２００９年７月２日　木曜日　午後２時５５分

Summary of Contents for Fantom G6





















































































































































































































































































































































Search results

Summary of Contents for Fantom G6

Reviews:

Related manuals for Fantom G6

Brands by name

Popular brands

Roland Fantom G6, User Manual

Search results

Summary of Contents for Fantom G6

Reviews:

Related manuals for Fantom G6

Brands by name

Popular brands