Roland Fantom G6 User Manual Download

Page: 214 / 340

214

Playing Back a Song

Phrases from within the Fantom-G project can be auditioned from a
list.

Here’s how to access the Phrase List and audition a phrase from the
project.

Press [SONG].

The Song Play screen will appear.

Press [F3 (Phrase List)].

The MIDI Phrase List screen will appear.

F-key operations in the MIDI Phrase List screen

Turn the VALUE dial or use [INC] [DEC] or

select a phrase.

Press and hold [F7 (Preview)].

You’ll hear the selected phrase.

Here’s how to load a phrase from the project into memory.

Press [SONG].

The Song Play screen will appear.

Press [F3 (Phrase List)].

The MIDI Phrase List screen will appear.

Turn the VALUE dial or use [INC] [DEC] or

select a phrase.

Press [F1 (Load)].

A confirmation message will appear.

Press [F7 (OK)] to execute.

If you decide to cancel, press [F8 (EXIT)].

Playing Phrases (MIDI Phrase)

Auditioning a Phrase (MIDI Phrase List)

F-key

Explanation

Page

F1
Load

Loads a phrase from the project into memo-
ry.

p. 214

F2
Save

Saves the selected phrase to the project.

p. 216

F3
Util Menu

Save All

Save all phrases

p. 216

Delete Phrase

Deletes the phrase file
from the project

p. 215

Duplicate

Duplicates the phrase

p. 215

F6
Edit

Returns to the previous screen.

–

F7
Preview

Auditions the selected phrase.

p. 214

F8
Phrase Edit

Displays the edit screen for the selected
phrase.

p. 238

Loading a Phrase (Load)

The phrase list shows the current phrase status

Phrase name

This shows the phrase name. If this
field indicates “

EMPTY

,” the phrase

has not been loaded into memory. Load
the phrase as needed.

This indicates whether the file exists in

the project. Phrases without the

symbol have not been saved, and there-
fore will be lost when you turn off the
power. Save the phrase if necessary.

This indicates a phrase that has been
edited. The changes you made will be
lost when you turn off the power. Save
the phrase if necessary.

Fantom-G_r_e.book 214 ページ２００９年７月２日　木曜日　午後２時５５分

Summary of Contents for Fantom G6





















































































































































































































































































































































Search results

Summary of Contents for Fantom G6

Reviews:

Related manuals for Fantom G6

Brands by name

Popular brands

Roland Fantom G6, User Manual

Search results

Summary of Contents for Fantom G6

Reviews:

Related manuals for Fantom G6

Brands by name

Popular brands