Roland Fantom G6 User Manual Download

Page: 265 / 340

265

Editing a Sample

Over

view

Sound 1

Sound 2

Sound 3

Pad

Sampler

Menu/System

Appendix

Sequencer

This operation completes deletes the sample saved in the project,
along with its file.

Press [SAMPLE].

The Sample Edit screen will appear.

Press [F1 (Sample List)].

The Sample List display appears.

fig.14-008_50

Use VALUE dial, [INC] [DEC], or

to select a

sample.

Press [F3 (Util Menu)].

The Sample Utility Menu window will appear.

Press

to select “Delete Sample,” and then press

[F8 (Select)].

To cancel, press [F7 (Cancel)].

A message will ask you for confirmation.

Press [F7 (OK)] to execute.

To cancel, press [F8 (EXIT)].

Audio files (WAV/AIFF) from your computer can be imported into
memory as samples.

“Importing Audio file (Import Audio)”

(p. 287)

Deleting a Sample (Delete)

Importing an Audio File (WAV/AIFF)

from Your Computer

Fantom-G_r_e.book 265 ページ２００９年７月２日　木曜日　午後２時５５分

Summary of Contents for Fantom G6





















































































































































































































































































































































Search results

Summary of Contents for Fantom G6

Reviews:

Related manuals for Fantom G6

Brands by name

Popular brands

Roland Fantom G6, User Manual

Search results

Summary of Contents for Fantom G6

Reviews:

Related manuals for Fantom G6

Brands by name

Popular brands