Roland Fantom G6 User Manual Download

Page: 286 / 340

286

Menu Reference

You must observe the following points when the Fantom-G is
connected to your computer via USB.

• Don’t use your computer to move or delete folders within the

Fantom-G.

• Don’t use your computer to format or optimize the Fantom-G’s

user memory or USB memory, or execute operations such as
Scan Disk.

• The Fantom-G can only handle filenames consisting of single-

byte alphanumeric characters.

You cannot use a period “.” at the beginning of a file name.
Certain other characters (\ / : , ; * ? “ < > |) can also not be used
in a file name.

• Only the following types of files can be transferred between the

Fantom-G and your computer.

Song files (.SVQ/.SVA/.SVP)

Standard MIDI Files (.MID)

Audio files (.WAV/.AIF/.AIFF)

Bitmap files (.BMP) (800 x 480 pixels)

Text file (.TXT)

• To handle these files, use the appropriate method described

below.

Windows Vista/XP Users

In My Computer, right-click the “removable hard disk” icon
and execute “Remove.”

Press [EXIT].

Mac OSX Users

Drag the Fantom-G drive icon into the trash.

Press [EXIT].

Cautions Regarding Folders and Files

Standard MIDI
Files

Place the files in the following folder.

FantomG.Prj/SEQ/SMF

folder

“

FantomG.Prj

” is the name of the project folder

in the Fantom-G’s internal memory.
Multiple projects can be saved in USB memory.
By default, the project folder names will be
numbered as “

FantomG001.Prj

,”

“

FantomG002.Prj

,” etc., but the portion

preceding the filename extension will be the
project name you assign when saving the project.

Audio files

When placing the files from your computer,
place them in the following location.

IMPORT

folder

Then import the audio files.
If you want to use your computer to read
samples that were written by the Fantom-G,
load the files from the Project folder/SMPL
folder into your computer.

BMP files

When placing the files from your computer,
place them in the following location.

IMPORT

folder

Text files

When placing the files from your computer,
place them in the following location.

IMPORT

folder

Then import the text file.

Exiting Storage Mode

Fantom-G_r_e.book 286 ページ２００９年７月２日　木曜日　午後２時５５分

Summary of Contents for Fantom G6





















































































































































































































































































































































Search results

Summary of Contents for Fantom G6

Reviews:

Related manuals for Fantom G6

Brands by name

Popular brands

Roland Fantom G6, User Manual

Search results

Summary of Contents for Fantom G6

Reviews:

Related manuals for Fantom G6

Brands by name

Popular brands