301
System Settings (Settings Common to All Modes)
Over
view
Sound 1
Sound 2
Sound 3
Pad
Sampler
Menu/System
Appendix
Sequencer
Preview 1–4 Note Number
Specify the pitch of the four notes that will sound when the Preview
Mode parameter is set to “SINGLE” or “CHORD.”
Value:
C-1–G9
If “PHRASE” is selected for the Preview Mode parameter, these
settings will have no effect.
Preview 1–4 Velocity
Specify the velocity of the four notes that will sound when the
Preview Mode parameter is set to “SINGLE” or “CHORD.”
Value:
OFF, 0–127
If “PHRASE” is selected for the Preview Mode parameter, these
settings will have no effect.
System Control 1–4 Source
System Control Assign selects the MIDI message used as the System
Control.
Value
OFF:
The system control will not be used.
CC01–31, CC32(OFF), 33–95:
Control Change
PITCH BEND:
Pitch Bend
AFTERTOUCH:
Aftertouch
Screen Saver Type
Select the type of screen saver.
Value:
1–16
Screen Saver Time
Set the time (minutes) until the screen saver begins working.
If this is OFF, the screen saver will not appear.
Value:
OFF, 1–60 min.
Input Select
Input source of the external input sound
Value
DIGITAL IN:
DIGITAL AUDIO IN jack
LINE IN L/R:
INPUT jacks L/R (stereo)
LINE IN L:
INPUT jack L (mono)
MIC/GUITAR:
MIC/GUITAR jack
USB AUDIO:
USB connector
*
When an external device is connected to the DIGITAL AUDIO IN
connector and you disconnect the cable or power-off the external
device, noise may subsequently be heard in the input from DIGITAL
AUDIO IN. If this occurs, correctly reconnect the external device, or
turn the Fantom-G’s [MIX IN] switch off.
Digital/USB Input Level
If you’ve set Input Select to DIGITAL IN or USB AUDIO, this adjusts
the input level.
Value:
0–127
Mix In Switch
Turns the external input on/off.
Value:
OFF, ON
Default File Type
Specifies the file format used when saving a sample.
Value:
WAV, AIFF
Pre Sample Time
The length of sound preceding the moment at which sampling was
manually or automatically initiated that will be captured in the
sample. This lets you prevent the attack portion of the sound from
being omitted from the sample.
Value:
0–1000 ms
System Ctrl
System Control
This function, which departs from previously used methods, and instead
allows you to use MIDI messages to change tone settings in realtime, is
called the
Matrix Control
(p. 109). Similarly, the function allowing you to
use MIDI messages to change multi-effects settings in realtime is called
the
Multi-effects Control
Normally, the Matrix Control is used for making patch settings, and the
Multi-effects Control for making settings to patches, rhythm sets, sample
sets, live sets and studio sets. However, if you do not need to change the
MIDI messages used for matrix control or multi-effects control by each
patch/rhythm set/sample set/live set/studio set, or if you want to use a
specific MIDI message for matrix control or multi-effects control, you
will want to make use of
System Control.
In other words, you could call
the System Controls global Matrix Control/Multi-effects Control for the
entire Fantom-G.
You can use up to four System Controls.
Screen Saver
Input/Sampling
Fantom-G_r_e.book 301 ページ ２００９年７月２日 木曜日 午後２時５５分
