Roland DWP-80S User Manual Download

Page: 6 / 78

Chapter 1 Getting Started

Modeling Machine

Exterior

USB

No.

Name

Explanation

Front cover

Before starting operation and during operation, close
the front cover.

The front cover is orange to make it difficult for UV

rays to pass through.

Power button (P.10)

Storage

The storage can be used to store the level gauge
and wrenches.

Rubber feet (×4, with height adjustment
screws)

Used to adjust the tilt of the machine.

Power-cord connector

WARNING

Do not use any electrical power supply that does not meet

the ratings displayed on the AC adapter.

Doing so may result in fire or electrical shock.

WARNING

Never use any AC adapter or power cord other than those
included with the machine.

Doing so may result in fire or electrical shock.

WARNING

Handle the AC adapter, power cord, plug, and electrical
outlet correctly and with care. Never use any article that is
damaged.

Using a damaged article may result in fire or electrical shock.

USB connector

CAUTION

For the USB cable, use the included cable.

The computer may not be able to communicate with the

computer correctly.

Part Names

Summary of Contents for DWP-80S















































































Search results

Summary of Contents for DWP-80S

Reviews:

Related manuals for DWP-80S

Brands by name

Popular brands

Roland DWP-80S, User Manual

Search results

Summary of Contents for DWP-80S

Reviews:

Related manuals for DWP-80S

Brands by name

Popular brands