Chapter 2 Output
Fine-tuning the Print Conditions
In most cases it will not be necessary to change these settings in order to print.
Procedure
A
Click
.
B
Click [Advanced Print Conditions].
The [Advanced Print Conditions] dialog box appears.
Shrinkage factor
Correct for the shrinkage factor (magnification correction amount in the XY
direction during exposure). Increase the shrinkage factor using +, and decrease
the shrinkage factor using –.
Unit: [%]
Setting range: -5.0 to +5.0%
Layer height
Set the layer pitch.
Unit: [mm], [inch]
Options: 0.05, 0.10, 0.15 [mm]
Resin exposure
time
Set the resin exposure time.
Unit: [sec]
Setting range: 2.00 to 50.00 [sec]
Reset
Reset all settings to the standard value for the selected application (job type).
MEMO
The standard values (recommended values) for each setting under [Advanced Print Conditions] will vary according
to the application type.
Use Advanced/Useful Functions
43
Summary of Contents for DWP-80S
Page 78: ...R1 161121 FA01081 ...
