Chapter 2 Output
3. Printing
Step 1
: Add Resin to the Liquid Material Vat
1.
Check the preview and the estimated job volume for the resin.
A
Click
.
B
Click [Display Preview].
Finishing for a job can be confirmed in advance. A message notifying the user that the object extends
beyond the work area, or that there is an issue with the printing data, will be displayed. For details on
the message, refer to the Quick Denta help.
"
P. 9 "How to View Help 1", P. 9 "How to View Help 2"
C
Click
.
The amount of resin required to print the job is displayed.
MEMO
• Users can also calculate the estimated cost.
"
P. 45 "Showing the Estimated Cost"
• The maximum resin volume for use is 300 g.
• The calculated value is an estimate of the volume of resin to use, so ensure that a sufficient volume of resin is
available.
• The actual time it takes to complete printing is proportional to the height of the job (Z-axis direction).
28
Summary of Contents for DWP-80S
Page 78: ...R1 161121 FA01081 ...