58
Recording Karaoke
(continued)
10
Press the [
] (Record) button to enter recording-standby mode.
fig.rec-intmic04-e.eps
11
Press the [
] (Play) button to begin recording.
12
Play back your audio device (e.g., cassette deck).
The song being played will be recorded.
13
Press the [
] (Stop) button to stop recording.
fig.rec-intmic06-e.eps
The recorded song will be added to the end of the SD memory card or CD-R/RW disc.
If you want to listen to the song you recorded, press the [
] (Play) button
immediately after you stop recording.
Blinking
Remote control
Lit
Remote control
Remote control
●
“Key” (Page 75), “Pitch” (Page 76), and “Speed” (Page 77) settings will automatically
revert to the values of the original song only during recording. When recording ends,
these settings will return to the values you specified.
●
Sound will not be produced from the speakers while in recording-standby mode or while
recording. If you want to listen to the sound that’s being recorded, you’ll need to use
headphones. (Refer to Step 4 on Page 41.)
●
Howling could be produced depending on the location of microphones relative to
speakers. This can be remedied by:
1. Changing the orientation of the microphone(s).
2. Relocating microphone(s) at a greater distance from speakers.
3. Lowering volume levels.
●
When turning the [MIC] knob, you may hear a faint noise when the input level changes,
but this is not a malfunction.
●
The playback level (“SD/CD Level”) setting (Page 55) is common to the CD and the SD
memory card. When you turn off the power, this setting will return to “0.”
Important
CD-2u_SD-2u_e.book 58 ページ ２０１３年１月２４日 木曜日 午前１１時３４分
