Roland CD-2u, Owner'S Manual

Page: 52 / 140

52
Recording a Cassette or Digital Audio Player
Here’s how to record the sound from a cassette or Digital Audio Player.
4
Connect your audio device (e.g., cassette deck) to the CD-2u/SD-2u’s LINE
IN (L, R) jacks.
Use audio cables to connect the CD-2u/SD-2u’s LINE IN (L, R) jacks to the output jacks
of your audio device (e.g., cassette deck).
fig.connect-record-e.eps
5
Turn the [LINE] knob to adjust the input level at the LINE IN (L, R) jacks.
Adjust the loudness of the sound you’re recording. Since you’re not using the mic input,
set the [MIC LEVEL] switch to the “MANUAL” position, and then turn the [MIC] knob all
the way to the left (off).
While playing the song to be recorded, turn the [LINE] knob to adjust the input level.
Adjust the level so that the PEAK indicator located above the [LINE] knob lights briefly
during the loudest passages of the song that’s being recorded.
After you’ve adjusted the input level, rewind your playback device to the beginning of
the song that you want to record.
* When using the [MIC] knob or [LINE] knob, you might hear a slight noise when the recording
level changes; this does not indicate a malfunction.
fig.rec-line-e.eps
If You’re Recording to an SD
Memory Card If You’re Recording to a
CD-R/RW Disc
1
Turn on the power
(
☞
Page 22, 24).
1
Turn on the power
(
☞
Page 22).
2
Insert the SD memory card
(
☞
Page 26).
2
Insert the CD
(
☞
Page 29).
3
Set the audio source to “SD”
.
Press the [SD CARD] button so it’s lit.
fig.selectCD-e.eps
3
Set the audio source to “CD.”
Press the [CD] button so it’s lit.
fig.selectSD-e.eps
To the output jacks of
the record player
CD-2u/SD-2u: RCA phono type
Audio device:
RCA phono type
Types of plugs that can be connected
* Portable players use a stereo mini type jack.
R L
Louder Quieter
At this position
PEAK indicator
The level meter will move according
to the level of the audio input.
CD-2u_SD-2u_e.book 52 ページ ２０１３年１月２４日 木曜日 午前１１時３４分